ISP routing problem ?

somehow access to my web from malaysia ?

[[email protected] src]$ traceroute namran.net
traceroute to namran.net (58.65.232.121), 30 hops max, 38 byte packets
1  mars (192.168.100.1)  5.786 ms  3.933 ms  4.838 ms
2  202.56.84.77 (202.56.84.77)  43.149 ms  42.987 ms  34.997 ms
3  core-br0-ge0-3.airzed.com.my (202.56.80.33)  29.820 ms  34.174 ms  34.323 ms 4  203.114.17.145 (203.114.17.145)  40.060 ms  38.512 ms  39.857 ms
5  eth-my-bre.pacific.net.sg (192.169.32.77)  44.622 ms  45.067 ms  49.552 ms
6  arc001.pacific.net.sg (192.169.34.141)  55.357 ms  49.785 ms  49.908 ms
7  217.6.50.61 (217.6.50.61)  49.960 ms  54.876 ms  49.616 ms
8  217.239.41.10 (217.239.41.10)  74.821 ms  84.053 ms  80.128 ms
9  62.153.203.138 (62.153.203.138)  94.675 ms  79.562 ms  90.245 ms
10  v151.tmhc2.pacific.net.hk (202.64.4.129)  85.087 ms  86.341 ms  87.616 ms
11  v204.tmhs3504.pacific.net.hk (202.64.149.234)  84.948 ms  84.483 ms  79.324 ms
12  r1-fe1.hkg.myrdns.com (58.65.235.154)  95.082 ms  88.398 ms  85.024 ms
13  * * *
14  * * *
15  * * *
16  * * *
17  * * *
18  * * *
=== what ?

why is it routing to HK … ?

Get Free Email Updates!

Signup now and receive an email once I publish new content.

I will never give away, trade or sell your email address. You can unsubscribe at any time.

Like

Related Post

3 Responses

  1. HawkEYE says:

    I got better one after a few minute..
    by adding this two line before line 602 (/usr/share/system-config-network/netconfpkg/gui/maindialog.py)


    if (not isinstance (host.Hostname, str)):
    continue

    now it works like charms again.. hehe.. 😎

    Reply
  2. UncleOp says:

    This was helpful. Summary: if the /etc/hosts file is not well-formed, the python script doesn’t handle it well. In my case, somehow a long entry that was commented out got “line wrapped”, leaving some uncommented garbage on the next line. Fixing the hosts file or adding the above patch “worked”. It seems that some complaint to the user should be generated in such a case, though.

    Reply
    • HawkEYE says:

      @UncleOp , Glad it help.. thanks for dropping by..

      Reply

Anything to add?

X