Compiz + Fusion On Centos 5.3 with nvidia graphic card

Here is a some sort of tutorial or show off of the compiz + fusion
screen .. to view this blog.

R1GyEG3pAxw

Tools used are :

1. CentOS 5.3
2. Compiz + Fusion Icon
3. Mac4Linux
4. x11vnc
5. vnc2swf
6. pyvnc2swf

of course my laptop Dell D630 Latitude + with the pink mouse.. hahahahaa

For those in need for reference, this is my xorg.conf..

[[email protected] ~]$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  ([email protected])  Thu Dec 13 19:09:35 PST 2007

# Xorg configuration created by system-config-display

Section "ServerLayout"
    Identifier     "single head configuration"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Synaptics" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"

    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
                Load           "glx"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier     "Synaptics"
    Driver         "synaptics"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "auto-dev"
    Option         "Emulate3Buttons" "yes"
    Option         "LeftEdge" "120"
    Option         "RightEdge" "830"
    Option         "TopEdge" "120"
    Option         "BottomEdge" "650"
    Option         "FingerLow" "14"
    Option         "FingerHigh" "15"
    Option         "MaxTapMove" "110"
    Option         "VertScrollDelta" "20"
    Option         "HorizScrollDelta" "20"
    Option         "MinSpeed" "0.3"
    Option         "MaxSpeed" "0.75"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
    Identifier     "Monitor0"
    ModelName      "LCD Panel 1440x900"
    HorizSync       31.5 - 100.0
    VertRefresh     59.0 - 75.0
    Option         "dpms"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 0
        Depth       24
        Modes      "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection

                ##

                  ## NVidia
  
        Option "AddARGBGLXVisuals" "True"
        Option "DisableGLXRootClipping" "True"
EndSection


###

Section "Extensions"
    Option "Composite" "Enable"
EndSection

So that can have 3D cube like this…

3D-cube-scaled

compiz-3d-cube-scaled
p/s : after few years fiddling with compiz only recently managed to get it up correctly.

Related Post

One Response

  1. namran says:

    Note: Installation of NX Server for Linux requires the download and installation of three packages: client, node and server. The client is needed because it ships libraries used by the node. The node is needed because it ships tools needed by the server. Furthermore, the SSH server daemon (SSHD) needs to be up and running on each of the NX Node machines since NX relies on the mechanism provided by the SSH subsystem for handling user authentication.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *