In case you happened to block certain site from being access from you pc/notebook/server or whatever..
let’s say.. it is a “site.com”
let check the ip address of the site..
[root@nb-namran ~]# nslookup site.com
Server: 208.67.222.220
Address: 208.67.222.220#53
Non-authoritative answer:
Name: site.com
Address: 66.113.131.78
then to block it run
route add -host 66.113.131.78 gw 127.0.0.1
will be routed to localhost (lo) interface instead
in windows would be
route add 66.113.131.78 MASK 255.255.255.255 192.168.1.222
assumed 192.168.1.222 is some ip in your network that not been used.
.. it will be gone after reboot,
but if want it to be permanently would be something like
route -p add 66.113.131.78 MASK 255.255.255.255 192.168.1.222
in linux ..
you could either create a route file for each interface, e.g.,
/etc/sysconfig/network-scripts/route-lo
and put entries in it like this in the file:
66.113.131.78/32 via 127.0.0.1
or you can add route add commands to /etc/rc.local.
The Loopback Adapter and Windows file share tunneling: XP and 2003
The following instructions document how the Microsoft Loopback Adapter can be installed and configured for use with file share tunneling on Windows XP and 2003:
1. Installing the Loopback Adapter:
1. Open Start, Control Panel, Add Hardware.
2. Click Next on the introduction dialog box.
3. Select ‘Yes, I have already connected the hardware’ and click Next.
4. Scroll to the bottom of the list of hardware, select ‘Add a new hardware device’, then click Next.
5. Select ‘Install the hardware that I manually select from a list (Advanced)’, then click Next.
6. Select ‘Network adapters’, then click Next.
7. Select ‘Microsoft’ as the manufacturer, select ‘Microsoft Loopback Adapter’ as the adapter, then click Next.
8. Click Next to confim the installation.
9. Click Finish to complete the installation.
2. Configure the newly created adapter:
1. Open Start, Control Panel, Network Connections.
2. Select the newly created connection (should be named ‘Local Area Connection N’, where N is its order number).
3. Right click on the selected connection and choose Properties from the menu.
4. Confirm that ‘Microsoft Loopback Adapter’ (or ‘Microsoft Loopback Adapter #N’) is displayed in the ‘Connect Using:’ field. If it isn’t, return to step 2 and retry properties for another adapter.
5. Uncheck (disable) everything except ‘Internet Protocol (TCP/IP)’.
6. Select ‘Internet Protocol (TCP/IP)’, then click Properties to open ‘Internet Protocol (TCP/IP) Properties’.
7. Select ‘Use the following IP address:’ and fill in the ‘IP address:’ and ‘Subnet mask:’ fields (e.g. 10.10.10.10, 255.255.255.0).
8. Click Advanced to open ‘Advanced TCP/IP Settings’.
9. Switch to WINS and select ‘Disable NetBIOS over TCP/IP’.
10. Click OK to close ‘Advanced TCP/IP Settings’.
11. Click OK to close the ‘Internet Protocol (TCP/IP) Properties’.
12. Optionally (on XP only) uncheck (disable) ‘Notify me when this connection has limited or no conectivity’ to remove the connection warning icon from the system notification area.
13. Click OK to close the connection properties.
If you later want to uninstall the Microsoft Loopback Adapter (once it is not needed any more for the forwarding of a Windows file share), you can uninstall it using Control Panel > System > Hardware > Device Manager.
Tunnel Windows shares
Main page
MSLA on WinXP/2003
MSLA on Windows 2000
MSLA on Windows NT4
Various tips
How-Tos and Tutorials
How the internet works
Using WinSSHD for SFTP
Port forwarding guide
Tunnel Remote Desktop
Tunnel Windows shares
Tunnel WinVNC
Try out WinSSHD!
WinSSHD is an advanced SSH server for Windows with secure remote access, file transfer and tunneling features. Supports public key authentication, SCP, SFTP. Its advantages include speed, reliability, ease of use, configurability, and bvterm – the best remote console on the Windows platform. Try it free for up to 30 days!
Try out Tunnelier!
Tunnelier is a friendly and flexible SSH client for Windows which includes state of the art terminal emulation, graphical as well as command-line SFTP support, an FTP-to-SFTP bridge, powerful tunneling features, and also remote administration for WinSSHD. Free for individual use!
The Loopback Adapter and Windows file share tunneling: XP and 2003
The following instructions document how the Microsoft Loopback Adapter can be installed and configured for use with file share tunneling on Windows XP and 2003:
1. Installing the Loopback Adapter:
1. Open Start, Control Panel, Add Hardware.
2. Click Next on the introduction dialog box.
3. Select ‘Yes, I have already connected the hardware’ and click Next.
4. Scroll to the bottom of the list of hardware, select ‘Add a new hardware device’, then click Next.
5. Select ‘Install the hardware that I manually select from a list (Advanced)’, then click Next.
6. Select ‘Network adapters’, then click Next.
7. Select ‘Microsoft’ as the manufacturer, select ‘Microsoft Loopback Adapter’ as the adapter, then click Next.
8. Click Next to confim the installation.
9. Click Finish to complete the installation.
2. Configure the newly created adapter:
1. Open Start, Control Panel, Network Connections.
2. Select the newly created connection (should be named ‘Local Area Connection N’, where N is its order number).
3. Right click on the selected connection and choose Properties from the menu.
4. Confirm that ‘Microsoft Loopback Adapter’ (or ‘Microsoft Loopback Adapter #N’) is displayed in the ‘Connect Using:’ field. If it isn’t, return to step 2 and retry properties for another adapter.
5. Uncheck (disable) everything except ‘Internet Protocol (TCP/IP)’.
6. Select ‘Internet Protocol (TCP/IP)’, then click Properties to open ‘Internet Protocol (TCP/IP) Properties’.
7. Select ‘Use the following IP address:’ and fill in the ‘IP address:’ and ‘Subnet mask:’ fields (e.g. 10.10.10.10, 255.255.255.0).
8. Click Advanced to open ‘Advanced TCP/IP Settings’.
9. Switch to WINS and select ‘Disable NetBIOS over TCP/IP’.
10. Click OK to close ‘Advanced TCP/IP Settings’.
11. Click OK to close the ‘Internet Protocol (TCP/IP) Properties’.
12. Optionally (on XP only) uncheck (disable) ‘Notify me when this connection has limited or no conectivity’ to remove the connection warning icon from the system notification area.
13. Click OK to close the connection properties.
If you later want to uninstall the Microsoft Loopback Adapter (once it is not needed any more for the forwarding of a Windows file share), you can uninstall it using Control Panel > System > Hardware > Device Manager.
Tunnel Windows shares
Main page
MSLA on WinXP/2003
MSLA on Windows 2000
MSLA on Windows NT4
Various tips
How-Tos and Tutorials
How the internet works
Using WinSSHD for SFTP
Port forwarding guide
Tunnel Remote Desktop
Tunnel Windows shares
Tunnel WinVNC
Try out WinSSHD!
WinSSHD is an advanced SSH server for Windows with secure remote access, file transfer and tunneling features. Supports public key authentication, SCP, SFTP. Its advantages include speed, reliability, ease of use, configurability, and bvterm – the best remote console on the Windows platform. Try it free for up to 30 days!
Try out Tunnelier!
Tunnelier is a friendly and flexible SSH client for Windows which includes state of the art terminal emulation, graphical as well as command-line SFTP support, an FTP-to-SFTP bridge, powerful tunneling features, and also remote administration for WinSSHD. Free for individual use!
Hence, it can be concluded that cranes are here to stay as they are indispensable in certain industries.
He’s not the owner, but with perseverance, he did make it to the management level and is able to offer a lot to the company he works for and in return, he’s been noticed.
Since there are several firms offering truck dismantling
services, you would need to carry out some groundwork to choose the best firm.
Hence, it can be concluded that cranes are here to stay as they are indispensable in certain industries.
He’s not the owner, but with perseverance, he did make it to the management level and is able to offer a lot to the company he works for and in return, he’s been noticed.
Since there are several firms offering truck dismantling
services, you would need to carry out some groundwork to choose the best firm.